解决了

什么是使用5个不同的数据集的最佳实践在每个复苏?

  • 2023年7月21日
  • 1回复
  • 4的观点
Daria
Userlevel 3
徽章 + 2
  • Daria
  • 社区负责人
  • 16日回复

如果我有5集的配置参数,每组有3个CP,

我想在第一次运行使用设置# 1,

使用第一个复苏后设置# 2场景…等

最佳实践是什么?谢谢你！

图标

最佳答案社区管理员2023年7月21日,十一31

You should use Reuse TestStep Block with 3 parameters (value 1, value 2, value 3) to fill data in test case or Recovery Scenario.<\/p>
RTB - Fill info
    Business Parameter
        Param 1
        Param 2
        Param 3   <\/code><\/pre>
- In Test case, you set a buffer\u00a0RecoveryCount = 1<\/code>, then call RTB - Fill info (Set1_CP1, Set1_CP2, Set1_CP3)<\/p>
- In Recovery Scenario, you use 4 IF condition to check buffer RecoveryCount as below<\/p>
IF \/\/ Recovery first time
    Condition
         TBox Set Buffer            Value       ActionMode
              RecoveryCount           1              Verify
    Then
        TBox Set Buffer            Value       ActionMode
              RecoveryCount           2              Input
         RTB - Fill info (Set2_CP1, Set2_CP2, Set2_CP3)

IF \/\/ Recovery second time
    Condition
         TBox Set Buffer            Value       ActionMode
              RecoveryCount           2              Verify
    Then
        TBox Set Buffer            Value       ActionMode
              RecoveryCount           3              Input
         RTB - Fill info (Set3_CP1, Set3_CP2, Set3_CP3)

IF \/\/ Recovery third time
    Condition
         TBox Set Buffer            Value       ActionMode
              RecoveryCount           3              Verify
    Then
        TBox Set Buffer            Value       ActionMode
              RecoveryCount           4              Input
         RTB - Fill info (Set4_CP1, Set4_CP2, Set4_CP3)

IF \/\/ Recovery forth time
    Condition
         TBox Set Buffer            Value       ActionMode
              RecoveryCount           4              Verify
    Then
        TBox Set Buffer            Value       ActionMode
              RecoveryCount           5              Input
         RTB - Fill info (Set5_CP1, Set5_CP2, Set5_CP3)              <\/code><\/pre>","className":"post__content__best_answer"}">
查看原始
质量超出测试
If I have 5 sets of Configuration Parameters, each set has 3 CP,<\/p>

I want to use set#1 in the first run,<\/p>

use set#2 after the first recovery scenario...etc<\/p>

What is the best practice? Thank you.<\/p>","quoteUsername":"Daria","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote & Reply","Share":"Share"}}}">

1回复

C
Userlevel 3
徽章 + 2

您应该使用重用TestStep块与三个参数(值1,值2,价值3)来填充数据测试用例或恢复场景。

RTB——填信息
业务参数
参数1
参数2
参数3

——测试用例,你设定一个缓冲区RecoveryCount = 1,然后调用RTB填补信息(Set1_CP1、Set1_CP2 Set1_CP3)

——在恢复场景中,您使用4如果条件检查缓冲区RecoveryCount如下

如果第一次/ /恢复
条件
TBox ActionMode设置缓冲区的值
RecoveryCount 1验证
然后
TBox ActionMode设置缓冲区的值
RecoveryCount 2输入
RTB填补信息(Set2_CP1、Set2_CP2 Set2_CP3)

如果第二次/ /恢复
条件
TBox ActionMode设置缓冲区的值
RecoveryCount 2验证
然后
TBox ActionMode设置缓冲区的值
RecoveryCount 3输入
RTB填补信息(Set3_CP1、Set3_CP2 Set3_CP3)

如果第三次/ /恢复
条件
TBox ActionMode设置缓冲区的值
RecoveryCount 3验证
然后
TBox ActionMode设置缓冲区的值
RecoveryCount 4输入
RTB填补信息(Set4_CP1、Set4_CP2 Set4_CP3)

如果/ /恢复时间
条件
TBox ActionMode设置缓冲区的值
RecoveryCount 4验证
然后
TBox ActionMode设置缓冲区的值
RecoveryCount 5输入
RTB填补信息(Set5_CP1、Set5_CP2 Set5_CP3)
You should use Reuse TestStep Block with 3 parameters (value 1, value 2, value 3) to fill data in test case or Recovery Scenario.<\/p>
RTB - Fill info
    Business Parameter
        Param 1
        Param 2
        Param 3   <\/code><\/pre>
- In Test case, you set a buffer\u00a0RecoveryCount = 1<\/code>, then call RTB - Fill info (Set1_CP1, Set1_CP2, Set1_CP3)<\/p>
- In Recovery Scenario, you use 4 IF condition to check buffer RecoveryCount as below<\/p>
IF \/\/ Recovery first time
    Condition
         TBox Set Buffer            Value       ActionMode
              RecoveryCount           1              Verify
    Then
        TBox Set Buffer            Value       ActionMode
              RecoveryCount           2              Input
         RTB - Fill info (Set2_CP1, Set2_CP2, Set2_CP3)

IF \/\/ Recovery second time
    Condition
         TBox Set Buffer            Value       ActionMode
              RecoveryCount           2              Verify
    Then
        TBox Set Buffer            Value       ActionMode
              RecoveryCount           3              Input
         RTB - Fill info (Set3_CP1, Set3_CP2, Set3_CP3)

IF \/\/ Recovery third time
    Condition
         TBox Set Buffer            Value       ActionMode
              RecoveryCount           3              Verify
    Then
        TBox Set Buffer            Value       ActionMode
              RecoveryCount           4              Input
         RTB - Fill info (Set4_CP1, Set4_CP2, Set4_CP3)

IF \/\/ Recovery forth time
    Condition
         TBox Set Buffer            Value       ActionMode
              RecoveryCount           4              Verify
    Then
        TBox Set Buffer            Value       ActionMode
              RecoveryCount           5              Input
         RTB - Fill info (Set5_CP1, Set5_CP2, Set5_CP3)              <\/code><\/pre>","quoteUsername":"Community Administrator","translations":{"Common":{"like":"Like","unlike":"Unlike"},"Forum":{"Quote":"Quote & Reply","Share":"Share"}}}">

回复


Learn more about our cookies.<\/a>","cookiepolicy.button":"Accept cookies","cookiepolicy.button.deny":"Deny all","cookiepolicy.link":"Cookie settings","cookiepolicy.modal.title":"Cookie settings","cookiepolicy.modal.content":"We use 3 different kinds of cookies. You can choose which cookies you want to accept. We need basic cookies to make this site work, therefore these are the minimum you can select. Learn more about our cookies.<\/a>","cookiepolicy.modal.level1":"Basic
Functional","cookiepolicy.modal.level2":"Normal
Functional + analytics","cookiepolicy.modal.level3":"Complete
Functional + analytics + social media + embedded videos"}}}">

金宝搏app官网下载
Baidu
map